0 Members and 1 Guest are viewing this topic.
I ordered axles way too long. Did I read on here to measure axles: with axles straight, level with ground, measure from back edges of both cv's, then add 1/2"? Also, what is the width of your cars from outside edges of paddle tires?
Trying a few ideas for connecting links. Nothing definite yet, but this might look and work good, hopefully. I bet you guys realize how much time something this simple can take!! And may not work.NO NO NO on a grand scale Brian. No way in God's green earth that a tube welded to the bearing housing will withstand all the force that will be applied to it. You will need some kind of a bearing housing around the bearing carrier. The top transvirce arm has way to much leverage on that set up you are planing now. Add in the factor of you will warp the hell out of the bearing housing buy the time you get it all welded up.