0 Members and 1 Guest are viewing this topic.
Let me tryThis way better ------- \/-------Or this way------- /\-------Or does it matter?Thanks Fabr
let me see....It's like a full caged and suspended wagon that is about 4' long and 30" wide. The distance between the A pillar and B pillar is about 30" front to back and 23" across. There will be a cooler that could weigh 80# hanging from the bottom rail in the center of the chassis. The bottom rail and top rail are only about 10" apart so I'm not even sure I need any extra support. However, since the top and bottom rail are not connected in the span between the A and B pillar, I just want to make sure it doesn't pull the bottom rail down or worse have the entire thing fold up.If it matters in your thoughts, there will be about 60# hanging from the top of the cage down where someone would normally sit. It will be holding a BBQ and solar panel.Thanks for helping.
Is this what I think it is DW? Will it have a thingamajig and some yippydy-ki-I-o's and Roll? If so it's about time you got a start on it.
I will swing thru North Ala and pu next Thur eve? We will test it thoroughly in St A. No charge for DTSfab member!! And don't forget,