0 Members and 4 Guests are viewing this topic.
Have you not had any fan troubles. When we were at LS I had almost all the fins break off the hubs. Same unit you have exactly.After I got back from Yuma I had 3 fins broken off just like last time at LS. They made the fans good last time as a one time warranty/PR. They replaced these also but I'm worried about sticking one of the fins into the rad core as they break free.
THe angle isn't the issue IMO. It's the vibrating,unsupported blades. Mine will only last a few days before beginning to shed blades.I'm on like my 8th fan so far.
SERIOUSLY!!?? Damn, I better get a couple more!The two that were on it did not have any noticable vibration, but I do have a prop balancer Im gunna try and set the spares up in and see how far off they are out of the box.The blades have never touched the rad fins so I dont think its a contact issue or mounting angle either.
Thanks Fabr! Hate you too! With all the airflow stuff you study, what are your thoughts on the boost curve ramping in to peak a bit faster? I mean since the turbo is no longer pressurizing a massive void of an IC first.. I thought I read somewhere that too large an IC can cause some lag in itself..