Redesigning the system, so I have a radiator up for grabs
SRS (Street Rod Stuff) Dual Core
*Dual 1 inch wide tubes measuring 2-3/8" wide.
*3 inches thick at the tanks
*24" wide
*13" tall
*1 inch inlet and outlets
*14 fins per inch
*Top and bottom air director/fin covers
*Billet aluminum filler neck
*1/4" drain petcock installed
*I built the fan brackets to use a Flex-A-Lite Scirocco fan
http://www.summitracing.com/parts/FLX-365/ -FAN NOT INCLUDED!-
*Side brackets are fabricated from .080 inch aluminum sheet (SRS installed these and could of done a much better job IMO) Slight crack starting in the tops at the weld from my seats pushing up against the radiator, simple fix or easily removed or modified to do brackets of your choice..
*Radiators was tested at 30 p.s.i. before shipping by SRS
$185