0 Members and 1 Guest are viewing this topic.
The thing is, he's running over 200 HP with the Busa so I'm not sure I will have enough horse power to push them with a 1000cc engine. I think they are 30" tires. Also, what backspacing is needed for the cuda?
With proper gearing you can do it.
That begs the question: Does anyone want to post how to figure overall gearing? I don't have time right now. Too much going on.
I need options for the Barracuda. I'll be running 4x136 on the front and 5x4.5 on the rear. Is there any chance to find matching wheels or am I going to be mixing and matching. I like this tire/wheel combo more than the ATV combo that is common since I will be running high desert terrain. Any ideas what sizes I should be looking for and where I should start looking?Thanks!
4.5" is real close to 115mm 1/2 a mm small. They might work, but mights are on a chickens butt. 115 pattern is used on Artic cat and on rear banshee and raptor. Find a bud with one you can try before you order.Then you can p/u some 14" utv wheels: http://www.mud-throwers.com/inc/sdetail/1011/10382orhttp://www.mud-throwers.com/inc/sdetail/1011/21687then mount up what ever 14" tire you like. avt utv or drag slicks/