0 Members and 1 Guest are viewing this topic.
what size rose joints are you boys using I was thinking of 20mm which is 3/4" in your money https://www.ebay.co.uk/itm/POS20-20mm-Male-Rose-Joint-Rod-End-Bearing-M20-Right-Hand-RVH/272224293735?epid=590201484&hash=item3f61d51367:g:XAAAAOSwCkZZQlx6:rk:12:pf:0is that to big ?
used ones, as a special bonus they come with caked on little sahara sand.
Quote from: dsrace on November 17, 2018, 02:58:19 PMused ones, as a special bonus they come with caked on little sahara sand.well they certainly look robust enough, let me go measure my hubs to see if they will fit , what size rose joints did you use since i would need to use the samei used 5/8" heim joints with high misalignment spacers that reduce down to a 1/2" bolt.
used ones, as a special bonus they come with caked on little sahara sand.well they certainly look robust enough, let me go measure my hubs to see if they will fit , what size rose joints did you use since i would need to use the same
I agree that's what I figured 4" of travel on a good day anyway lets forget about that and move onto something with 12" of traveland it was these hubs I was thinking about, do you sell them and any idea about cost of shipping to uk ? think it will be prohibitively expensive, and my hubs will have different bolt spacing as well
you may have to weld a reducer plate in for your wheel bearings.
working on more front end kit spindles. the stubs thread in then get welded on both sides. doug heim idea and damn good one.
lol ya it's a nice safety net lol i sent you a pm with some info of a source over there on your side of the pond for spacers and heims.