DTSFab.com (Desert, Trail and Sand)

Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Motor and Drivetrain => Topic started by: 455bird on November 06, 2008, 05:33:50 AM

Title: measurements engine/trans
Post by: 455bird on November 06, 2008, 05:33:50 AM

Does anyone have the measurements on a 091 bus trans and an ecotec , also how they weigh. Looking at making a new car with this package and car only 13 foot long.

Title: Re: measurements engine/trans
Post by: Admin on November 06, 2008, 05:36:40 AM

id say nose to tail with an adapter plate, at least 60" maybe 72

Title: Re: measurements engine/trans
Post by: SPEC on November 06, 2008, 05:39:28 AM

Fabr should be able to get the measurements today or tomarrow his 091 should be there by then

Title: Re: measurements engine/trans
Post by: fabr on November 06, 2008, 06:00:05 AM

It'll be here today.UPS shows the shipping weight as 97.8#'s.I'll get the measurement today.

Title: Re: measurements engine/trans
Post by: Punkur67 on November 06, 2008, 09:17:33 AM

Do you just want end to end. I can call a friend who is mocking one up in his baja bug and its bolted together on the floor right now so I can get some good measurements.

Title: Re: measurements engine/trans
Post by: SPEC on November 06, 2008, 01:48:12 PM

Hey Fabr,
You got that sucker outa the box yet?

Title: Re: measurements engine/trans
Post by: fabr on November 06, 2008, 02:01:24 PM

Just got it about an hour ago. I'll check it out in a little while.

Title: Re: measurements engine/trans
Post by: Punkur67 on November 06, 2008, 06:11:32 PM

Forgot to say he is mocking up an 091 with an ecotech and they are bolted together in the corner of his garage.

Title: Re: measurements engine/trans
Post by: 455bird on November 10, 2008, 03:39:24 AM

Punkur67 i would love to have that measurment L/W/H if you can