Author Topic: Non plunging 930 rear drive project.  (Read 27019 times)

0 Members and 1 Guest are viewing this topic.

Offline Yummi

  • Grumpy, Sneezey and Dopey all rolled into one.
  • Administration
  • *
  • Posts: 238
    • Jeeping With Dogs
Re: Non plunging 930 rear drive project.
« Reply #60 on: January 05, 2016, 06:12:43 AM »
I'll keep my bragging rights simple and short...
My buggy breaks all the damn time.. But i'm still 35 minutes away from st.A

lol

Them are good bragers. 
**********************
I like things that move.   Pretty much limits me to cars and strippers

Did you know I have a blog?  Come on now, it is 2016, everybody does.  http://www.jeepingwithdogs.com

Offline jersdunz

  • Fabricator
  • **
  • Posts: 108
Re: Non plunging 930 rear drive project.
« Reply #61 on: January 05, 2016, 06:39:51 AM »


Slipper axles as you had mentioned.
When I had the spool everything was at zero or very close to zero plunge.
But of course I didn't design my spool to match the rpm ( I wish i had )
So last August when the rpm went in I gained about 3/8" of plunge.
That was the 3 week from new to failure set up on this last joint

It may have been more than 3/8 too that just is a number that's stuck in my head.
« Last Edit: January 05, 2016, 06:42:15 AM by jersdunz »

Offline jersdunz

  • Fabricator
  • **
  • Posts: 108
Re: Non plunging 930 rear drive project.
« Reply #62 on: January 05, 2016, 11:19:52 AM »
So today I can't help but wonder how much headache in the future i'm going to save by changing up the rear arms cutting out the arm mounts and squaring everything up like it should be.
If you guys have any design ideas on how I might do that I'm open for ideas.
Print out on of the section views I've posted and mark um would ya please..

it really seems wastefull to do that considering the work I put into it last summer but damnit, i'm tired of drive train issues...

Offline fabr

  • Administrator
  • *
  • Posts: 93125
Re: Non plunging 930 rear drive project.
« Reply #63 on: January 05, 2016, 12:08:27 PM »
you won't regret redoing it with improved geometry now  in the long run. That's a given.your buggy parts will adore you more as well..................................... rofl
« Last Edit: January 05, 2016, 12:14:24 PM by fabr »
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline jersdunz

  • Fabricator
  • **
  • Posts: 108
Re: Non plunging 930 rear drive project.
« Reply #64 on: January 10, 2016, 02:18:08 AM »
I went out to jasons shop and acquired some fresh real info from the car.
Good news is I wont be adding any unnecessary travel.
The better news is because,
there will be no "new" travel slash angle.
I shouldn't have any interference's to deal with & can proceed without major modifications, beyond the new bearing carriers.

I thought from initial setup, That i was running more angle than I am.

Zero at the Back cross tube.


Just over 25-26* hanging from the ( unloaded ) Limit strap.


And right around 32-33* @ the end of the shock hard mounts.
I'll limit them to 30* assuming boots clear the bottom cross tube and forget them for a while!!

Here is a few pics of the new hubs and alignment plates







Offline fabr

  • Administrator
  • *
  • Posts: 93125
Re: Non plunging 930 rear drive project.
« Reply #65 on: January 10, 2016, 08:20:33 AM »
What's the purpose of the purple plates?
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline jersdunz

  • Fabricator
  • **
  • Posts: 108
Re: Non plunging 930 rear drive project.
« Reply #66 on: January 10, 2016, 03:47:11 PM »
Just an alignment jig for assembly

Offline fabr

  • Administrator
  • *
  • Posts: 93125
Re: Non plunging 930 rear drive project.
« Reply #67 on: January 10, 2016, 06:00:06 PM »
I see,said the blind man. bb:
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline jersdunz

  • Fabricator
  • **
  • Posts: 108
Re: Non plunging 930 rear drive project.
« Reply #68 on: January 11, 2016, 04:24:07 PM »
Parts in the mail...
« Last Edit: January 11, 2016, 04:27:40 PM by jersdunz »

Offline dsrace

  • VIP
  • *
  • Posts: 8579
  • my one true weakness
Re: Non plunging 930 rear drive project.
« Reply #69 on: January 11, 2016, 05:01:09 PM »
drill them and put grease zerts in them
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline fabr

  • Administrator
  • *
  • Posts: 93125
Re: Non plunging 930 rear drive project.
« Reply #70 on: January 11, 2016, 06:15:06 PM »
With that thick a spacer,I'd suggest you have a spare cv flange in the trailer if you use Empi ones.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"


Offline fabr

  • Administrator
  • *
  • Posts: 93125
Re: Non plunging 930 rear drive project.
« Reply #72 on: January 14, 2016, 07:09:06 PM »
rcv really makes some nice stuff don't they.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline jersdunz

  • Fabricator
  • **
  • Posts: 108
Re: Non plunging 930 rear drive project.
« Reply #73 on: January 14, 2016, 10:50:22 PM »
rcv really makes some nice stuff don't they.

I leaning towards.... YUP!!
I hope so .. they are certainly not giving it away..
Here's to years of dune ripping reliability with good American parts!!

 :e

Offline fabr

  • Administrator
  • *
  • Posts: 93125
Re: Non plunging 930 rear drive project.
« Reply #74 on: January 15, 2016, 06:05:49 AM »
I had one fail recently. Over 4 years use. I got 8 of nearly the first ones they made.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal