0 Members and 2 Guests are viewing this topic.
Don't know of a remote, but I bet someone sells one. Outfront would be the best source to ask. When shorten the pan use a heavy gauge plate for the bottom so you don't cave it in on a hard hit. Outfront adds a round bar stock to the bottom of their oil pickups so the pickup won't slam flat to the oil pan bottom and run dry on oil. See pic in this link: http://www.outfrontmotorsports.com/oil_pan.htm#Oil SumpAlso plan your return water line carefully when fabbing engine mounts and rear frame. Mine was a bear to fit it all in.
Im pretty sure I have a shortened pan and might be taking off a 6 qt cast aluminium pan that is short as well. I also have other parts in the garage from some mods I made to my subie.