DTSFab.com (Desert, Trail and Sand)

Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Motor and Drivetrain => Topic started by: fabr on November 13, 2008, 10:54:56 PM

Title: 091 shift pattern
Post by: fabr on November 13, 2008, 10:54:56 PM

WTF is the shift rods pattern ? Which way do you turn/push/pull for each gear?

Title: Re: 091 shift pattern
Post by: Yummi on November 14, 2008, 05:28:03 AM

standard H - reverse is to the left and down (back) or did I really miss the question? 

Title: Re: 091 shift pattern
Post by: fabr on November 14, 2008, 05:50:40 AM

Not the shifter pattern.The shifter rod on the nosecone. What motion does it make for each gear?

Title: Re: 091 shift pattern
Post by: Yummi on November 14, 2008, 06:20:59 AM

See, i gotta quit posting until the 2nd cup of coffee.  Dont know, but I bet a quick email to this guy and the answer will be yours.....

http://www.ratwell.com/technical/091Transmission.html (http://www.ratwell.com/technical/091Transmission.html)

http://www.type2.com/rvanness/transmis.htm (http://www.type2.com/rvanness/transmis.htm)

Title: Re: 091 shift pattern
Post by: fabr on November 14, 2008, 06:34:39 AM

LOL! Yeah Ratwell has a ton of info.

Title: Re: 091 shift pattern
Post by: Az Transaxle on November 14, 2008, 11:23:19 AM

With trans sitting in the position its sits in the Bus, you are in front of shift stick looking towards trans. Counter clockwise and pull is reverse, centered push is 1st, pull for 2nd, rotate stick clockwise push is 3rd, pull 4th.

Title: Re: 091 shift pattern
Post by: fabr on November 14, 2008, 11:29:43 AM

Thanks for the help.