Author Topic: 930 non plunge cv's  (Read 14743 times)

0 Members and 1 Guest are viewing this topic.

Online dsrace

  • VIP
  • *
  • Posts: 8582
  • my one true weakness
930 non plunge cv's
« on: February 04, 2010, 08:05:50 PM »
ok they showed up today.  ok the housing is 1.345" wide and the cage is actually wider than the housing and it is 1.623" wide. the gkn plunging 930 I have in the box is actually is 1.58" but the box says bmw but does still fit the 930 pattern. the cage is centered in the non plunge (np) but the star is actually off center visually 3/16". installing the recessed side out of the drive cup the axle will go 47* at that point it touches the housing but flip it over and it goes farther but doesn't matter because you can't get a boot to survive past 40 according to the cv supplier. now in my hand the cage plunges about 1/32" and the star with the balls another 1/32" so together 1/16" per cv (np). this is great since my axle only plunges 1/8" through a 24" stroke! as you can see from the bad pics I am posting the balls are equally space so fabbr you are right the greaser plates won't work on these cv's!  :'( I'll have to have a chat with that world expert machinest about this little set back!  ;) ;)

« Last Edit: February 04, 2010, 09:06:30 PM by Dsrace »
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline Doug Heim

  • Bad @$$ Buggy Builder & Parts Supplier
  • Forum Sponsor
  • *
  • Posts: 2739
    • Doug Heim's Photo Bucket
Re: 930 non plunge cv's
« Reply #1 on: February 04, 2010, 08:29:33 PM »
That angle is redicilous! Awesome! Who is this damn machinist you keep talking about? Not sure why you just dont have me look into it  thumb down

Online dsrace

  • VIP
  • *
  • Posts: 8582
  • my one true weakness
Re: 930 non plunge cv's
« Reply #2 on: February 04, 2010, 08:55:41 PM »
That angle is redicilous! Awesome! Who is this damn machinist you keep talking about? Not sure why you just dont have me look into it  thumb down
OK OK I'll have to give you a try this time!  rofl  ;D instead of the street artist  ;D
what do you think about some grease plates with 1/2" stand off for a 930cv with equally spaced balls, I will only need 2 plates?

Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Online fabr

  • Administrator
  • *
  • Posts: 93126
Re: 930 non plunge cv's
« Reply #3 on: February 04, 2010, 09:16:21 PM »
You been listening to the wrong guy ds. ;D(Inside joke guys!) Sorry DS ,I couldn't help it. LMAO That guy told you he didn't know crap for sure. rofl rofl
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Online dsrace

  • VIP
  • *
  • Posts: 8582
  • my one true weakness
Re: 930 non plunge cv's
« Reply #4 on: February 04, 2010, 09:23:37 PM »
ya well I couldn't remember if I talked to him or his voice double  :o rofl
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Online fabr

  • Administrator
  • *
  • Posts: 93126
Re: 930 non plunge cv's
« Reply #5 on: February 04, 2010, 09:46:00 PM »
ANOTHER inside joke! LOL!!!!!
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline Doug Heim

  • Bad @$$ Buggy Builder & Parts Supplier
  • Forum Sponsor
  • *
  • Posts: 2739
    • Doug Heim's Photo Bucket
Re: 930 non plunge cv's
« Reply #6 on: February 04, 2010, 10:12:50 PM »
I guess if everyone wanted in, they should show up at the group events!

Online fabr

  • Administrator
  • *
  • Posts: 93126
Re: 930 non plunge cv's
« Reply #7 on: February 04, 2010, 10:31:54 PM »
Where's my hat at anyway? I bought more of these than anyone.  ;) But you did do the legwork. 8)  Great job.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Online dsrace

  • VIP
  • *
  • Posts: 8582
  • my one true weakness
Re: 930 non plunge cv's
« Reply #8 on: February 05, 2010, 07:51:04 PM »
I thought I would break it in for you!!  rofl
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Online dsrace

  • VIP
  • *
  • Posts: 8582
  • my one true weakness
Re: 930 non plunge cv's
« Reply #9 on: February 05, 2010, 07:51:59 PM »
yours is on it's way with the cv's! I put it in a plastic bag so it wouldn't get greasy!  ;D
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Online fabr

  • Administrator
  • *
  • Posts: 93126
Re: 930 non plunge cv's
« Reply #10 on: February 05, 2010, 08:06:22 PM »
LOL!!!!!!
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline Doug Heim

  • Bad @$$ Buggy Builder & Parts Supplier
  • Forum Sponsor
  • *
  • Posts: 2739
    • Doug Heim's Photo Bucket
Re: 930 non plunge cv's
« Reply #11 on: February 05, 2010, 09:06:43 PM »
 rofl

Offline BDKW1

  • Hero Member
  • ****
  • Posts: 896
Re: 930 non plunge cv's
« Reply #12 on: February 07, 2010, 06:13:52 PM »
I have actually run them up to 45* total with steering. Granted it sees that rarely and not for long. I took longer axles and cut them down so the spline was just long enough to go through the star. This gave a lot more clearance to the housing.

Online dsrace

  • VIP
  • *
  • Posts: 8582
  • my one true weakness
Re: 930 non plunge cv's
« Reply #13 on: February 10, 2010, 09:06:30 PM »
any problems? how long did you run them and with what?
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline BDKW1

  • Hero Member
  • ****
  • Posts: 896
Re: 930 non plunge cv's
« Reply #14 on: February 11, 2010, 10:17:50 AM »
The longest running set is on a Toyota T100 pre-runner. http://jdfabrication.com/index.php?option=com_content&task=view&id=58&Itemid=89 We switched it over from regular CV's about 4? years ago. Same CV's are still in good shape. The only problems have been keeping the bolts tight. On something that heavy with that much gear reduction in 4X they have to be assembled dry with Locktight between the CV and cup and on all the bolts. They are safety wired afterwords also........ If the damn thing comes loose again, I'm tacking the CV to the cup..........

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal