0 Members and 1 Guest are viewing this topic.
Fab: Will actually define the "spot", and it'll read like "For all values of X, such that theta is less than C and greater than B, blah blah bla...." Like Eng said, it's not easy but it is doable
Will actually define the "spot", and it'll read like "For all values of X, such that theta is less than C and greater than B, blah blah bla...." Like Eng said, it's not easy but it is doable
Camel, your mounting point seems distinctly different from the one shown earlier, got any ideas or guesses why that is?
Ugh.... Hard work eh? So the blue magenta and orange arc's (circle's) center points are the inner mount points?I take it you rotate the outer carrier on those radiuses as you showed earlier.Have you checked the maximum deviation of the magenta circle from the mounting point on the outer carrier?It seems like it may be off at the bottom of the travel, depending on how much camber there is. It would seem to me that the inner magenta pivot would need to be a bit further outboard to make up for the attach point on the carrier being outboard of the two A-arm attach points.
what is the plunge and maximum angle of the edge cvs