0 Members and 1 Guest are viewing this topic.
I used 3/4 chromoly tube with sweet weld u joints. The are a bit spendy but work great. For my mount I used two 3/4 heims I had leftover. I have never used a setup that had so little slop in it. I dont think I will ever use a different setup. No bushings to wear out or bearings to grease. Now is also a great time to mention try to keep the least amount of angle possible in your joints. They will last much longer and work better too. I mount one u joint directly on the rack and the other just on the other side of the steering mount.