DTSFab.com (Desert, Trail and Sand)

The DTS Trader => Good finds to pass on => Topic started by: nagel on April 25, 2011, 07:40:22 AM

Title: Wish I had the space for this table..
Post by: nagel on April 25, 2011, 07:40:22 AM

Steal at $1500.. 

http://newjersey.craigslist.org/tls/2340578769.html (http://newjersey.craigslist.org/tls/2340578769.html)

Almost worth it just for the scrap value here alone!

Title: Re: Wish I had the space for this table..
Post by: Wyattboche on April 25, 2011, 12:19:35 PM

Dang, 6000#'s to 6500#'s. That's a heavy table. How do ya move that sucker around the shop, Guess you don't.

Title: Re: Wish I had the space for this table..
Post by: Doug Heim on April 25, 2011, 12:50:49 PM

I have just made a 9'X4.5' Table that is 4" thick (two plates bridged) and it is about 5000#. Built it for $300. The top was a platten for a press. Scrap guy sold it to me and I just made some legs for it that cost me nothing. I also drilled and tapped over 200 holes on a grid for fixturing. Flat as can be!!!

Your right I dont move it... Level it and leave it.