0 Members and 2 Guests are viewing this topic.
Thank's for all the help fellas. I got to put this thing on hold for a day or two and see if i can find tabs somewhere. I also got to get yet another welding machine. This time i aint efin around with it...im gonna go out and get a real good one. Tired of these things working for a day then they start acting all stupid and jumping around on the heat. I tried to make some tabs but they look like ass so i ripped it all back off. And Spec im using the arms off a 2001 warrior. Dont know what J arms are but i dont think i have them cuz mine look like everyone else's here. I think im just gonna suck it up and go buy the stuff to build my own damn arms. And to build my own trailing arms to. I just got to find somewhere to get tabs from. I need to buy them by the # cuz i seem to go through alot of them. I need a plasma cutter if im gonna make my own tabs. But I still think they would look like ass. Finally got some rims that will fit the honda hubs and got the tranny dropped. I also think i figured this shifter delima out. Ill have to test it out when i get that far. But i think i got it. Also Bug...I need to see if you can make me one of those blocks like you have on your clutch cable so you can run a morse able for the clutch. Let me know what you want for one and ill get it. Pedals came in today. To tell you the truth if i was to do another buggy i would do it different. Like get stuff laser cut with the files i got with the plans so its like putting together a puzzle. i guess thats about it for today. I did alot of stuff today...only to acomplish nothing. :] But hey...i know how not to do it now.
i made all my own tabs. just buy some length of 1/4 or 3/16 x 1 inch flat stock. then the easiest way i have found is to measure all your tabs out on one peice, including blade thickness of your bandsaw. then mark your holes. drill the holes first for each tab. then go back and cut all the tabs where you measured them. make sense? if not ill draw you a picture.