DTSFab.com (Desert, Trail and Sand)
General Discussion => The Pit Stop => Topic started by: dsrace on January 11, 2018, 06:09:06 AM
-
happy birthday glenn!
-
Looking good for 29!! Happy Bday Glenn!!!!
-
Happy birthday! Did you get the buggy back together yet?
-
?????? buggy back together? wth happend?
-
ya, spill the beans!
-
Happy Bday to the Ice Cream Man!
Hopfully just some bday upgrades.
-
hopefully but he's in yuma so who knows lol
-
(https://s17.postimg.org/mrcp4ytl7/5756_B116-6788-4148-8_FAB-1_B1_F1_F7_A59_CE.jpg) (https://postimg.org/image/mrcp4ytl7/)
-
that would be an issue lol
-
time go 934's and larger axles or 300m axles?
-
Happy Happy!
-
OH lookie!!! Fast can do the twist. rofl Looks to be a cheap axle to have twisted that far?
-
Happy Happy!
They were 300M Jeff.
-
What were you doing to twist off a 300M axle? Who made them?
-
What were you doing to twist off a 300M axle? Who made them?
setting in a ten foot deep hole. With the front end on one wall of the hole and the back two on the other wall. No one around to help me out so decided to try and get out myself. wound it up to 7k and dropped the hammer. Never turned a tire. After the explosion I got out and thought I had blown my trans. After we got it out and pulled back to the trailer the axle had come out of the boot and made a mess of the frame rail and water pipes.
Edit
To say don't know where they came from Faber
-
WOW. I once twisted a pinion off in my dragster. The car never budged off the line. It's amazing how that can happen but it does. Hope you didn't have to wait too long before someone came by. After that I bit the bullet ,bought all Strange stuff and never had another issue. Hope the fix of the car damage wasn't too bad for you.
-
BTW,what were you doing in the dunes by yourself?
-
BTW,what were you doing in the dunes by yourself?
this is a very good question??!!
-
What were you doing to twist off a 300M axle? Who made them?
setting in a ten foot deep hole. With the front end on one wall of the hole and the back two on the other wall. No one around to help me out so decided to try and get out myself. wound it up to 7k and dropped the hammer. Never turned a tire. After the explosion I got out and thought I had blown my trans. After we got it out and pulled back to the trailer the axle had come out of the boot and made a mess of the frame rail and water pipes.
Edit
To say don't know where they came from Faber
7k rpm N drop! only you fast only you :D ;) rofl
-
I was with my group. I had been lagging behind with a newbe and missed a hill was backing down when I hit the hole.