DTSFab.com (Desert, Trail and Sand)
General Discussion => The Pit Stop => Topic started by: komelika on March 02, 2016, 08:41:21 PM
-
Not sure why I haven't bought one already, but I want one. Seems I'm always a half degree off on when I need to be spot on.
What are you pros using? I'm in the $60 price range for the ballers (Fabr) out there!
-
i'm pretty low tech. i use a simple bevel square and don'y worry about a number. on my bender i have a tube bandit. not made anymore and nothing available like it that i know of. google it. you need to start producing one.
-
i'm pretty low tech. i use a simple bevel square and don'y worry about a number. on my bender i have a tube bandit. not made anymore and nothing available like it that i know of. google it. you need to start producing one.
that's a shame it looks like a very useful tool and i did a search and can't find one.
-
i just use a standard angle finder and on my bender i have a pointer but you have to get to know the tool as you will have to overbend 3* on most to get it right on.
-
that's a shame it looks like a very useful tool and i did a search and can't find one.
it is the very best thing ever for a bender.
-
I'm low tech as well, but my eye and my Starrett Angle meter always seem to be a degree off. I bought a digital on amazon.