Ive got some stuff left over from my buggy build that I decided I dont want clogging up my shop anymore.
Gabriel High Jacker air shocks with attatchments for seperate air tanks scuffed up but only used about 5minutes. $30
55 tooth sprocket with welded in 1-3/8" keyed hub, sprocket is used but still usable. $20
45 tooth sprocket used I think its suzuki bolt pattern- $10
Jamar 11/16 master cylinder used, with c-channel mount. $25
1988 Honda 250x front hubs with disc brakes and spindles- one has new bearings, and other is still tight- $40
two 10x7 aluminum wheels 4x110 pattern. one rims needs a small area straightened, its not cracked. with or without tires (as pictured) $25
4 type 2 cv joints- $10 each
stainless steel header parts (i used half of it for the 90*bends to finsih my buggy exhaust)--$20
1995 suzuki katana parts:
battery box- $5
starter solenoid- $5
petcock with good sock and sending unit- $20
exhaust header, modified to direct exhaust out to the sides of the engine-- $30
carb set (all 4 still together)-- $200
have entire engine but has rod knock. let me know if any parts off it are needed.
2003 GSXR600 parts:
muffler mount flange - $5
Stainless steel 1gallon primary fuel tank for fuel pump (has threaded bung for gravity fed larder tank)- $200
Radiator fan- $15
and finally,
2006 yamaha R1 vortex front sprocket 16tooth (stock is 17) used but very breifly. $20