0 Members and 1 Guest are viewing this topic.
One more thing to consider is using Auto reset fuze's. I use them in all my stuff and have really good luck. If something should ground in a fan or light they are like a breaker. Off for the ground then back on in a minuet. They will stay off as long as the ground is present. That way you don't have to carry a bunch of fuze's with you. Works for me anyways.
Most of it is 12 / 14. Couple larger for high draw items. Would you not have to consider draw to figure fuse size?
Back to fuse size selection. Found this - easy read and explains relationship of wires to load, etc. That being the case some of the light wires have a relativly small wire at the mount, etc. Seems like a 14/16 or so for some of the lights. http://www.oznium.com/forum/topic15761
So the answer is wire size is determined by load and fuse size is determined by wire size?