DTSFab.com (Desert, Trail and Sand)

UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV General Discussion => Topic started by: ace on August 06, 2009, 12:03:33 PM

Title: edge brakes
Post by: ace on August 06, 2009, 12:03:33 PM

Hey guys just wanted to ask your opinions.
How do the original edge piranha brakes perform?
This is on a 2001 piranha with front and rear breaks..
Thanks Joe

Title: Re: edge brakes
Post by: Doug Heim on August 06, 2009, 01:40:52 PM

The original single piston? I would recomend upgrading to their twin piston set up that they noy use. The sell all the components you would need and the calipers are not too bad. I have them on my Cuda. I have a connection on the calipers but right no my supplier is out and have been waiting for them as they are on back order for the last 2 months.

Title: Re: edge brakes
Post by: ace on August 06, 2009, 01:50:38 PM

Thanks Doug,
Well that's 1 more thing i'll be needing.
I'll check their site when I get home.
Will I need to change my hubs or will the new
Design fit the older set up?
Thanks joe

Title: Re: edge brakes
Post by: Doug Heim on August 06, 2009, 01:56:54 PM

the calipers do mount differently