DTSFab.com (Desert, Trail and Sand)

The Machine Shop => Everything Cad => Topic started by: Lance-W on May 26, 2011, 07:45:52 AM

Title: 3D Hayabusa model
Post by: Lance-W on May 26, 2011, 07:45:52 AM

Does anybody have a 3D Hayabusa engine IGES model or something I can succesfully import to Pro-E as a solid? 

It doesn't have to be perfect but just a rough envelope model.  Ideally the sprocket and motor mount locations would be the most valuable to me as far as accuracy is concerned...............

Title: Re: 3D Hayabusa model
Post by: Lance-W on May 26, 2011, 08:54:03 AM

Found one here.  Not the greatest but it's a start. 

At the bottom of the page http://dpcars.net/home/links.htm (http://dpcars.net/home/links.htm)

(https://dtsfab.com/proxy.php?request=http%3A%2F%2Fwww.dtsfab.com%2Findex%2FMGalleryItem.php%3Fid%3D1361&hash=011b4ddb61c3676281798c3c8920b0d669a360fe)

Title: Re: 3D Hayabusa model
Post by: Hammerworks on May 26, 2011, 02:44:55 PM

YESSSSS!!! Lance is working on something!

Title: Re: 3D Hayabusa model
Post by: Engineer on May 26, 2011, 05:00:11 PM

Nice!

Yah that looks similar to the model I used.  I downloaded a 2-d cad version (I am not saying that it is the same as this one but the way the head is radiused and the level of detail is the same.

Point is that the mounts were way off.  I just suggest that you double check some mount measurements if you are trying to use them for actual locations.  I found the head mounts (which aren't symetrical to be "twisted" from each other by 3/8" around 7 degrees, and the rear mounts were 3/16" off in separation.

Title: Re: 3D Hayabusa model
Post by: fabr on May 26, 2011, 06:23:18 PM

The site says 1/4" tolerance I think.

Title: Re: 3D Hayabusa model
Post by: Lance-W on May 26, 2011, 09:33:37 PM

I have a motor sitting in the garage you can be sure I will check before cutting metal :)

I'm mostly interested in the mounting points near the sprocket for right now.  Those will be much easier to measure!

Title: Re: 3D Hayabusa model
Post by: Lance-W on May 26, 2011, 09:34:06 PM

Quote from: Hammerworks on May 26, 2011, 02:44:55 PM

YESSSSS!!! Lance is working on something!

 ;D  uh-huh   ;D

Title: Re: 3D Hayabusa model
Post by: Doug Heim on May 27, 2011, 11:04:33 PM

Lance thats the same model I have...