DTSFab.com (Desert, Trail and Sand)
UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Controls and Electrical => Topic started by: boltz2012 on May 13, 2009, 09:42:43 AM
-
Ok...I need to get my hands on a steering rack. I measured my frame and i think an 18" rack will work. I also need 2 heims and the bungs for the arms. I tried making another rack work and after hours of frustration you got to draw the line somewhere. So where can i get a rack and the heims?
-
the bungs can come from Doug, tell him you need 5/8 bungs. for whatever size tubing. the rack can come from empi, or dans performance parts... Give me your address and well get you one...
(https://dtsfab.com/proxy.php?request=http%3A%2F%2Fdansperformanceparts.com%2Fbuggy%2Fsusp%2FEnd%2520load%2520rack%2520and%2520pinion.jpg&hash=a0111181159216dbc8df14d7e092310a04ec15d7)
-
There's 50 bux in the pot now.Anyone else wanna pitch in? Let's get 'er done!
-
There's 50 bux in the pot now.Anyone else wanna pitch in? Let's get 'er done!
Put me down for $25.00 and I have two 1/2 inch x 5/8 himes with ML spacers that I used for mock up only that If he can use them there his. I do have one each 1/2 inch x 1/2 to. But only one.
-
The rack has a 5/8 spread in the clevis, the hole is 1/2" so it will have to get drilled or we can get some 5/8 x 1/2 heims... Anyone else want to help out this is a community effort, Do not feel obligated by any means, If you can great, if you cant thats ok to, If you want to remain nameless, please feel free to pm Myself, fabber or Spec... For any contact info etc...
-
Anyone wishing to help can paypal at
hangonsloupy@terraworld.net
Or pm Fabber for Addy to send check or MO...
-
-
We now have in hand 75 bux.Thank you guys!
-
Fellas...I dont know what to say. Im speechless. You guys are some of the best guys ive had the privledge of knowing. I cant wait to meet you in person and shake all of your hands. And shred some sand. I am so totally stoke about October that ive been up day and night working on all my stuff. Thank you so much. And know that it i can ever return the favor...all you got to do is ask.
-
I have alot of used 1/2 rod ends (not chromolly) I have left hand and right hand. ill donate the thread inserts and if you need tube let me know the O.D. and lengths. Ill cut the tube and supply the bungs so I know it will all work out.
-
bit more chucked into the pot from Aus..
-
This rack is adjustable to 16 5/8 if we need to we can get some adapters made up easily enough... ;D We have an excellent group of fellas around here...
-
Thank you Ozman!! We are now at 105 bux! We're gonna get this man a box real quick now.
-
We need some Ujoints and stuff as well, If we get to much money well find something else he needs... ;D
-
I dont know the lengths of the tubing yet. How do i measur it? Thank you all so much.
-
Well have to make sure we get the right rack to work for ya first :) Then go from there..
-
just figure long this way you can trim to lenght and install the inserts once you know for sure. Do you want 1" o.D. aor 1.25" O.D.
I also have U-joints off of an escort column. Ill just send you the whole column and you can trim trim here, snip snip there, and weld weld here.
-
I guess 1" would work just fine.
-
LOL you should make me a crude drawing of where exactly to trim trim here, snip snip here, and weld weld here....lol
-
I just kicked in $25.00 I hope this helps! This is on behalf of the Ozzies ;)
-
I just kicked in $25.00 I hope this helps! This is on behalf of the Ozzies ;)
All you Ozzies are upstanding gents. I don't care what Masterfaber say.
-
I say the ozzies are OK .They just talk fookin funny.LOL!!!! We have 130 bux!
-
did you decide what rack we need for him yet? Whats the cost on the one we need?
-
Well he is Rear steer so we have to rethink the plan a bit..
-
FLip it over. The one you found will work then.
-
im gonna redo the front so its front steer like we was talking bug
-
Then it'll still work. ;D ;D
-
right on
-
Ya I don't see any reason it cant flip...
-
Did this die already? Havent heard anything in a couple of days and am just wondering?
-
Nope we are getting it covered.... Probably order tomorrow...
-
yep.
-
Ok everyone I want to thank you for your help in getting the rack. I ordered it today and i want to let everyone in on the link to where i got it. I found the same rack from Dan's for less and with the same shipping time only with free shipping. Here is the link https://www2.cip1.com/ProductDetails.asp?ProductCode=C26-425-152.
I am gonna use the other part of the money to buy the u-joint for it and the steering shaft..heims and the tie rod parts. Thank you again.
-
You are welcome!
-
Link no good tho.
-
Ya welcome Boltz good luck Bud!!!
-
try this...
http://www2.cip1.com/ProductDetails.asp?ProductCode=C26-425-152 (http://www2.cip1.com/ProductDetails.asp?ProductCode=C26-425-152)
-
Cool!