0 Members and 1 Guest are viewing this topic.
I assume what I'm being told is to shorten the name to less than 8 characters so the software will not alter it and then it should be able to find the file. I know it's on the USB stick but since the name is now different it's not found by the USb device.
This thread is worthless without.......... :P Actually, I want to see some pics of the giant 4'th axis..........
I was told it was used as just an indexer using M functions.
Hopefully you have a 4th axis card in the controller. That will make things much simpler. Then the M code is for the brake release and an A axis call out will control the movement. If you don't have the 4th card you will need a stand alone controller for it that you programm. Then you would use M codes to signal it to move. Good for positioning, not so good for actual interpolated cuts.