0 Members and 1 Guest are viewing this topic.
the pic above with what looks like an orange redish lower control arm, what did that come off of? it looks diff than the one rear end you just posted a pic of. those inner cv's on the pair of axles you just posted a pic of are what i call tri pod cv's https://en.oreca-store.com/gkn-tripod-cv-joint-24-splines-gi2600i.html what they look like. i do not know the correct name but they don't allow for higher angles. if your going to keep those then you'll need to see how far they will articulate or if there is a rating on them. that complete rear end you pictured looks to have a bushinged tie rod which a lot of irs rear end designs have. this is why i used the term bump steer. i like that irs rear end you have pictured. when you have time, pull a wheel and get a close up pic of the knuckle/ hub. also i wonder what spline count is on the axle where it goes into the inner cv.