Author Topic: 4x4 mini buggy  (Read 11766 times)

0 Members and 1 Guest are viewing this topic.

Offline thedoctor

  • Fabricator
  • **
  • Posts: 218
Re: 4x4 mini buggy
« Reply #15 on: September 28, 2009, 06:33:26 PM »
I have gotten a little bit of work done. I made up a mount for a gas tank I had "in the back of my garage". My friends freak at the things I have "in the back of my garage". Maybe some of you sledheads will recognize it. I bent up a new exhaust pipe to fit in the frame. I cut the steering shaft apart and shortened the end that bolts on the steering box. I will have a longer middle shaft as recommended. I mocked up location for oil tank.I found a hood "in the back of my garage". Again, maybe you sledheads will recognize it. It is looking like a rockbuggy now. Tim
In the words of my father "Never give up too soon, you might miss a good piece."

Offline thedoctor

  • Fabricator
  • **
  • Posts: 218
Re: 4x4 mini buggy
« Reply #16 on: June 04, 2010, 08:33:16 PM »
Well,I have started working on this project again. I have fabbed a driveshaft. I bought yokes from Baum Hydraulics.  They have a lot of parts you don't see anywhere else [hex hubs,any size u joint, etc].I have started building a seat. I will be posting pictures soon. Tim
In the words of my father "Never give up too soon, you might miss a good piece."

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal