0 Members and 1 Guest are viewing this topic.
I want to ask if you have determined that rack will work with your front suspension design without creating bumpsteer?
this would prob hold just fine http://www.mooreparts.com/store/product/1258/AC425152/but as already stated if its not the correct width for your buggy its just a paper weight. pick andmeasurment of front of buggy and we could give you the right answer.and the tie rods are probably useless for your rail. pickup "5/8 swedged alum rods" from speedway motors. many different lengths threaded ends, 10-15 bucks.
i'll be honest i dont know how to check that how do i check the rigth width of the rack for me design to avoid bump steer?
Yes those are the tierods. Here is a basic drawing looking front front of car. The rack should be the width of frame frome left side A-arm pivot to the right side A-arm pivot. Hopfully this makes sense. Are you building to plans?
Rashid,NOW is the time to do this part correctly. Follow Carl's advice. Also d a search here for bumpsteer. Lots has been written on the subject. One of the very most important things to the success ,and your happiness with the results of your build, is attention to this detail of assembly.
Yes Carl, but I have changed the design to double a arms instead of a single a armsThe distance between the left and right a arms pivots is 180mm which is about 7" Do you thinks the 11" rack will work ?Or should I increase the distance between the two a arms pivots?