0 Members and 1 Guest are viewing this topic.
And THAT from the cuda master!
Whatsize rod end should I use?Plan to use brakes from front of the bike, any comments?Seat-Where and how do you measure for one?Since I'm a big old boy, I have tought about widening the main roll bar and maybe add a little height to accomendate my back side. Any thoughts?Doug, since all my trails I ride on was basically designed around atv's, If I wanted to make mine somewhat narrower I sure the control/A arms would be the item to shorten, any thought on this?Thanks for your comments.
- Use the sizes in the plans but use quality rod ends- brakes from the front of a bike will be fine.- the seats are usually measured by the width. I buy mine from Auto Magazines. When you call to order they will assist you. Hopfully others will pipe up here as Im not sure on this.- Widening and lengthening the main hoop is no problem and will probably benefit you.- Shortening the A-arms will limit the travel and change the placment of the shock mounts. If you use FOX Airs you will not need to worry about the bulkyness of coilovers to help with shock clearance. Making a Cuda narrow you will suffer the stability and IMO the look of it. Get yourself some equipment and make the trails wider LOL.Just my 10 cents!