1
Motor and Drivetrain / Re: I want it i need it.....its time
« Last post by dsrace on Today at 06:30:13 AM »No need to wet sand the edges. Dry is fine. I suggest at least 2 thickness masking tape on saw foot and 2 on the windshield just to be safe against scratches. HINT:Use ONLY sharp,ground teeth jig saw blades. Do not use fine tooth types either.Are you doing a glue in? I figured you would do a rubber mount. I pretty much had no choice but I think I would do the rubber mount again. I have some scrap material and will do a couple bends to see if the coating scratches/fractures.
i guess i had never heard of ground tooth jig saw blades but ill look into it. i did tell him i wanted 1/4" thick and the cat gasket is good for 3/16" to 1/4". the jk wrangler windshield doens't have much curve to it but it does have a curve where the older wrangler windshields are flat.
on the fence as to glue in or gasket. i know which style gasket you used and if i use gasket it will be what i call the self locking cat style. here is a link to graingers site that sells what i call self locking cat gasket.
https://www.grainger.com/product/10G557?gucid=N:N:PS:Paid:MS:CSM-2295:TVRYAD:20501231&gclid=f5e4a3db1f7e1cd15cd4c5fa0f971a91&gclsrc=3p.ds&msclkid=f5e4a3db1f7e1cd15cd4c5fa0f971a91&gclid=f5e4a3db1f7e1cd15cd4c5fa0f971a91&gclsrc=3p.ds