0 Members and 2 Guests are viewing this topic.
Bought a fuel pump might try to get it on tonight. It was cheaper than filling the fuel tank.
http://dtsfab.com/index/index.php?action=dlattach;topic=337.0;attach=1099Hoping new back bars will keep from flexing. The rear spool bolts to a plate w/slots for chain adjusting. Last test the plate bowed up just a little, I have reinforced that now too. The spool even when torqued to 150lbs would slip, so now adj chain then tack weld spool in place. No more slipping. That xr200 probable has a bent shift shaft fork on the inside of cover. Could probably straighten it out but I would not mess with as long as the current fix is holding up. Thanks for the tip might see if that helps.
I think the shock is leaned out to far. What you think, this pic is with me standing on it and the shock is not even clode to the "majic 90" to the lower a-arm.