0 Members and 2 Guests are viewing this topic.
denatured alcohol is what we use and a razor blade. after cut on both side squirt a healthy amount of alcohol down the crack but bend the glass down slightly to let it down to the celluloid and wait a few seconds while a small amount of tension is still on it. it will almost disolve in front of you.
I've seen belt sander used to clean up bad spots. Wet sand for the polished look. The diamond sanding pads would work great and last forever. And good continuous rim diamond bade will wet cut it like butter. Would deff use water to cut glass, air powered grinder with a water hose if you dont want to buy one of the saws will work.
Harbor Freight has the perfect tool, oh yea never mind.