Hey Jet,
I was around at Digrite today and caught up with your old man, doing what he likes most, operating machinery in interesting and almost foolhardy ways! Looks like I've got another week's reprieve on moving the lathe (three tons of fine Australian cast iron). Thank Christ. It's pissing down here at the moment and I had to engage 4WD when I tried to get the Truckster through the mud and onto the slab! Looks like I'm going to have to tear down half the old shed to get the lathe onto the plinth.
BTW, I'm fitting the data logger tomorrow night and reflashing the K8's ECU, (in the cleanroom). Bring your extractors over and I'll fit a bung so you can use the datalogger while I'm away.
Cheers,
Camel