0 Members and 2 Guests are viewing this topic.
ok so i need 3 lines. one @ 80 inches, with 10mm straight banjos. then i need 2 @ 55 inches with straight 10mm banjos.. i believe they are 10mm.. with a tape measure it looked like 13/32, which is 10.31mm, would that be 10mm.. or what? standard honda brake calipers from some street bike and also a trx 4 wheeler..
master cylinder not big enough?
you either have air in the lines, or the master is too small. Or it could be all those squishy rubber lines you ran because the right ones were too expensive...