0 Members and 1 Guest are viewing this topic.
I have the low buck notcher on my bending stand with an air cylender on itQuite fast and easy...I've been singing it's praises for years but nobody listened For a 90* joint...15 seconds and a perfect fit
I like the looks of the Balleigh but see some limitations IMO. I like the one I got from Trick-Tools.http://www.vansantent.com/tube_coping_machines/TN1000.htm
Extremely rigid. One Timken bearing clamp bolt to adjust angle. NEVER had it slip and only takes a slight amount of pressure to lock it in place. The saw is held so rigid I can do a complete chassis with only 1 holesaw ,no tooth loss and cutting dry with no lube.
JMR makes some nice looking stuff
To bad the owner is the biggest flaming douchebag ripoff conartist in the world.