DTSFab.com (Desert, Trail and Sand)

Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Chassis and Suspension => Topic started by: DeepBusch69 on January 23, 2021, 04:37:52 PM

Title: building a new chassis with full CAD tooling
Post by: DeepBusch69 on January 23, 2021, 04:37:52 PM
https://www.youtube.com/watch?v=JaS_NREbAY4

Now this is how to build a new frame. 
Title: Re: building a new chassis with full CAD tooling
Post by: fabr on January 24, 2021, 09:47:47 AM
Very cool.
Title: Re: building a new chassis with full CAD tooling
Post by: dsrace on January 26, 2021, 02:46:42 PM
now that's the way to do it!! all pre bent and lazer cut! i'm sure he'll put plenty of power in for that heavier build. thanks budlight69
SimplePortal 2.3.7 © 2008-2024, SimplePortal