0 Members and 1 Guest are viewing this topic.
Hey Dan just a quick question off topic, you mentioned that you might do a section on a build of a CNC mill are you still gonna do that? Just I'm very interested...
That ram air fan is for a Honda car. A car would have more power than a bike.
10 amps @ 12 volts will only give you 120 watts of power.My calculations are right !! That's assuming that the motor is in fact 900 watts !!I can't find where they state that the motor uses a 10 amp fuse! I think there's a bit of B/S on their part stating that the motor is rated at 900 watt
Here is some food for thought. Again it's for a briggs, not a honda, but all the info is good and for the most part nickel and dime stuff. It's a step by step buildup with dyno results for a "box stock" class engine. That basically means that an engine like this could come right off the assembly line. There are some changes specific to racing, but could easily be done to a toy like cam, exhaust, and fuel. Keep in mind that with no rule book requirements, there is soooo much more you can do. I have prolly already posted this somewhere, but I get a out of it every time. Final output was 170% of original. So here it is...http://www.aviator.cc/briggs.txt