Arizona Transaxle Exchange

[Yummi]

So, here is a story about as exciting as telling you about a great dentist -

- Happy to have found a good one, but, don't wanna go back anytime soon.  - Bill's words not mine. 

Bill of Arizona Transaxle Exchange is a site sponsor and one of the nicest guys you will meet.  I managed to break my bus box, I guess he could give the details of what all was replaced.  But here is my take:

LOTS! Lots and lots was replaced.  Came to pick the trans axle up and there was a pile of stuff. I would say about 30% of the possible parts there are in / on the dang thing are all fresh.  All carefully marked, checked with dye pen and we went through every part. 

Now, half of what it all does does not make sense to me.  But Bill was happy to show and explain everything that was bad. I sensed he would have spent as much time as I wanted to to ensure I understood why, what, and how it needed to be fixed / replaced. 

He also went through the entire transaxle, and made sure it met HIS standards.  Replaced more than I would have figured needed to be replaced.  Showed me where the guys before had made / come up with some less than ideal solutions that are now - you guessed it - RIGHT!

Service - wont find it better anywhere else.  Period. 

As to cost, well, I won't kiss and tell, but members do get a discount, and I am VERY comfortable that the price was MORE THAN FAIR.

So, here is the big question as this is a national, and somewhat international board. 
In Arizona - Worth the drive no matter where you are at.
In US  - they don't weigh that much and it is likely worth the shipping costs as well.  I say yes!


The piece of mind alone knowing that you have the right equipment / service  etc is worth the shipping costs.    

I am 100% confident that it was done right.  100% confident that if I hold up my end - ie - nothing stupid in the sand (This is so not looking good for me) - the box will hold up it's end and give me a very long service life.  When the time comes, and it will again, I will be back.

In the meantime - 100% thumbs up - pay the shipping, do the drive, it is worth the cost.   

[Jerry]

Yummi, were are they located.

[Yummi]

Indian School and 38th Ave.

[Jerry]

Yummi I am sorry i forgot i was not on the home page( could not find there ad). It is on the home page.

[Az Transaxle]

I have been pretty busy lately so I haven't had time to post much and that might be why my link is not showing. Try www.aztransaxle.com
Yummi I'm glad your pleased and thanks for your positive review!

[SPEC]

You will also
Find them on the bottom of the forum page in the vendor section

[Admin]

I have been pretty busy lately so I haven't had time to post much and that might be why my link is not showing. Try www.aztransaxle.com
Yummi I'm glad your pleased and thanks for your positive review!

Your link is still up, we have been reworking the site a bit, and jerry may have caught it when i had it down for a few, yummi graciously modified your banner as well...No problem on not being able to Post Whore everyday, we dont expect that....

[Az Transaxle]

Thanks guys!

[fabr]

So, here is a story about as exciting as telling you about a great dentist -

- Happy to have found a good one, but, don't wanna go back anytime soon.  - Bill's words not mine. 

Bill of Arizona Transaxle Exchange is a site sponsor and one of the nicest guys you will meet.  I managed to break my bus box, I guess he could give the details of what all was replaced.  But here is my take:

LOTS! Lots and lots was replaced.  Came to pick the trans axle up and there was a pile of stuff. I would say about 30% of the possible parts there are in / on the dang thing are all fresh.  All carefully marked, checked with dye pen and we went through every part. 

Now, half of what it all does does not make sense to me.  But Bill was happy to show and explain everything that was bad. I sensed he would have spent as much time as I wanted to to ensure I understood why, what, and how it needed to be fixed / replaced. 

He also went through the entire transaxle, and made sure it met HIS standards.  Replaced more than I would have figured needed to be replaced.  Showed me where the guys before had made / come up with some less than ideal solutions that are now - you guessed it - RIGHT!

Service - wont find it better anywhere else.  Period. 

As to cost, well, I won't kiss and tell, but members do get a discount, and I am VERY comfortable that the price was MORE THAN FAIR.

So, here is the big question as this is a national, and somewhat international board. 
In Arizona - Worth the drive no matter where you are at.
In US  - they don't weigh that much and it is likely worth the shipping costs as well.  I say yes!


The piece of mind alone knowing that you have the right equipment / service  etc is worth the shipping costs.    

I am 100% confident that it was done right.  100% confident that if I hold up my end - ie - nothing stupid in the sand (This is so not looking good for me) - the box will hold up it's end and give me a very long service life.  When the time comes, and it will again, I will be back.

In the meantime - 100% thumbs up - pay the shipping, do the drive, it is worth the cost.   

That is fantastic to hear. You won't get a much better testimonial than that!