0 Members and 1 Guest are viewing this topic.
zx12 clutch mounts on top of basket. I made a bracket that bolts to side of motor. Need to allow some space to not overheat those cylinders. Mine did at dunes, slightly pulls clutch in and burned up clutch. And I use 3/8 tube for the shifter linkage, I like the solid feel. On a 2 seater w/shifter in middle of seats its a real close to straight run back. I can shoot some pics if you would like?CRAP gotta order clutch if I'm gonna make LS in 6 weeks.........................
I will run the stock cable to the cockpit and mount the slave cylinder beside my seat. There is a ton of room there to mount it and it is out of the way. It also allows for a looping cable placement with no tight spots like mentioned.
I like that idea!! Make sure it is below the MC though
You will probably need a diode in one of the wires in the charging circuit to stop that.
Try #2 on this. Pics a little dark, hope you can make it out.Threw one of shifter rod just for fun of it.