DTSFab.com (Desert, Trail and Sand)
Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Chassis and Suspension => Topic started by: Odyknuck on February 04, 2010, 06:34:43 AM
-
I am in the process of converting my Woodsbuggy rear suspension over to coilovers. I currently have Fox 2.0 12" Smoothbodys with remote rezs that I will be re-using. I will be replacing the torsions with Fox. 2.0 12" Coilovers with adjustable compression. I need to split the vavling load between the two shocks in some fashion. What I need is a good starting point. The Emulsions are the standard 40/60 offering (may have numbers backwards). I am looking at getting the C/Os compression valvel at 30-60 adjustable and the rebound at 40.
I need to revalve the emulsions and I am looking for recommendations. The rear of the Buggy weighs in at 1540#