0 Members and 1 Guest are viewing this topic.
Not bad for a good filter/prefilter that does a good job of keeping clean air available. I was looking at their sizing chart and it appears it needs to be HUGE for a turbo busa. Am I missing something? I guess I COULD call them huh? Well,there's another thing i need to get done.
Oops! Yes you would size it for max RPM. That would put you in to the 5" series and it would be 32" long. Are you actully running the motor at its peak? I would call the supplier and talk with them. The max of 10 "WC shown on the chart equates to only a .3609 PSI pressure drop thru the filter. Thats not much. You could probably use the 4" and still be ok. The velocity would be higher however still acceptable and not impede performance. You would need to know what the max turbine RPM is however.
That turbine does not turn. It is stationary.It makes the air swirl to form a vortex that expels the debris before it gets to the element. At least that's how all have been that I've seen on heavy equipment.
Yes it has an actual mechanical turbine that spins. Your probably thinking of the McDonnel series that does not have one.