DTSFab.com (Desert, Trail and Sand)

UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV General Discussion => Topic started by: Wyattboche on December 02, 2009, 01:32:25 PM

Title: Axle shaft size
Post by: Wyattboche on December 02, 2009, 01:32:25 PM

In the process of making a 4X4 mini. Wanta know what size Axle shafts I should use? The motor is out of an atv. Also wanta run high angle, what cv's do you recomend?

Title: Re: Axle shaft size
Post by: Carlriddle on December 02, 2009, 02:44:51 PM

http://www.yaskyatv.com/prod/sus/goraxl.html (http://www.yaskyatv.com/prod/sus/goraxl.html)

These things gotta be over 40 degree.

Title: Re: Axle shaft size
Post by: RC51 Rhino on December 02, 2009, 09:35:20 PM

Those 'should' be gorilla axles with stock cv's i believe (duh Matt, click the link!!). I have a pile of factory Rhino axles and some stock rhino cv's if you are looking to experiment. Where are you located? I have a full set of 2008 Rhino factory axles i could send/ship you for $100. Plenty strong and parts are easily available.