Skipping a couple steps in the journey,I'll jump to the initial sand outing. I have a Fortin 5 speed sequential driven via torque converter. I use a dry sump with 2 1/2 gallon capacity for the engine and the torque converter shares the engine oil in lieu of ATF. Yes,I run engine oil in the converter. One sump feeding a 2 pressure section dry sump pump with 4 suction stages.
Anyway................the 2 oil coolers were not doing the job so ,me being me,I opted to replace them with a big ass Setrab cooler with a 1950cfm Spal fan. I'll post a couple pics later. To get the thing in though I had to take 1/3 of the friggin car apart to get it in place since I thought I made this thing plenty big when I was building it but ,WOW, was I wrong about that.
I also transferred one of the original coolers to the gearbox/ring and pinion lube system to keep the gearbox/ring and pinion happier. All in all ,I hope my slight heat issue is behind me now.