DTSFab.com (Desert, Trail and Sand)
Machinery, Trailers, Toyhaulers and Motorhomes => Machinery Builds => Topic started by: Wyattboche on October 29, 2013, 05:19:53 PM
-
I have a log splitter laying in the weeds. Is there somehow I can make it into a hydraulic tube bender using the ram,pump, and hoses. Would use a 110 volt hydro pump.
-
How many ton and what stroke?
-
Not sure on ton, but 24" stroke.
-
I would convert one of the one current models on the market. Most are designed with the conversion in mind. And the dies (where the $$$ gets tied up) are readily available and cheap. Custom +custom+custom=$$$,$$$.