DTSFab.com (Desert, Trail and Sand)
The Machine Shop => Tools/Tips and Tricks => Topic started by: Yummi on December 21, 2013, 05:40:09 PM
-
Friend of mine is stymied. Wants to build a little rolly thingy like them damn kiddy carts you see at the SSSS. No speed, just static - not life or death. Tabs, bushings etc are needed. Here is the rub: 3/4" frame diameter. He is not into forums, else I would tell him to post up.
So, I just say "Jason......" He wants to do it himself. Whatever.....
So the list?
Something like this in 1/2". http://www.pacificcustoms.com/mount100.html Looking for 12 in the 1/2" & 2 in 1". Then tabs. About 36 that are cut to weld on 3/4" chassis.
Just point me in the right direction please - he can shop from there, but having never looked, I have no idea where to point him.
-
Friend of mine is stymied. Wants to build a little rolly thingy like them damn kiddy carts you see at the SSSS. No speed, just static - not life or death. Tabs, bushings etc are needed. Here is the rub: 3/4" frame diameter. He is not into forums, else I would tell him to post up.
So, I just say "Jason......" He wants to do it himself. Whatever.....
So the list?
Something like this in 1/2". http://www.pacificcustoms.com/mount100.html Looking for 12 in the 1/2" & 2 in 1". Then tabs. About 36 that are cut to weld on 3/4" chassis.
Just point me in the right direction please - he can shop from there, but having never looked, I have no idea where to point him.
Macmaster Carr or something like that. Big book lot's of goodys like that. look here to http://www.sandparts.com/servlet/the-Sand-Rail-Frames-Chassis-and-Kits-cln-Tabs-and-Shock-Bosses/Categories
Some good stuff here. http://www.appletreeauto.com/VW-FABRICATION/?xid_176f4=773d6c7727e73e61c7e5b0d00a3f0f49
-
I have a ton of stuff left from previous builds. Tell him to pm me and I''ll bag them up and send them out.