DTSFab.com (Desert, Trail and Sand)
UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Member Project Logs => Topic started by: magnum4598 on March 11, 2009, 07:54:54 AM
-
im calling it the sand snake
this is what i have done over the last seven days
-
Looks like you figured it out ;D
-
ok i had troughble loading pictures lol figured it out the second time around
-
Looking good! What is the motor you have in the background?
I like your build table. Tougher than heck, but with room to slide clamps through.
Do you have it drawn up, or are you winging it?
-
i have bend tech pro i would never wing it to many things to go wrong tube cost to much thai madeanks for the compl on my table that was my own idea
all it is is 2x2 light gauge square tube with so many tubes so close
its 3'x8' the tubes are a little over a inch apart i made a guage block to space them i layed it out on a caroliner frame rack were i worked its very true and flat
-
its a motorcycle lift under it so i can raise and lower it i put 4x4s between for the table to sit flat on it
-
i almost for got you asked about the engine in the background
that is ackualy two 2005 gsxr 750s
i only have one harness and set of electrics and one fuel rail
one engine is suposed to have a nock in it the cylinder head is removed also
i havent tested the other engine yet but it will be for sale once i run it
but i have all of the swithches of of the bike and the speedo so it will make a nice kit if your intrested contact me magnum4598@yahoo.com
-
Looks like your coming right along. Nice little shop you've got there too ;)
Keep up the great work!
-
ok one last thing i am going busa baby the only way to fly hahahahahahlol i hope i will be able to afford the turbo to make some serious hp
-
Looks good, how do you like bend tech pro. I used it on my build and loved it
-
i started playing with some foam thats coverd with alum foil to moch up body panels i want to mold the with f/g looks pretty good
-
i started playing with some foam thats coverd with alum foil to moch up body panels i want to mold the with f/g looks pretty good
I'd like to see how that is going to work out. Glass will add a lot of class.