Author Topic: Gear-One 930 Midboard Hubs Repairs *#@***!!%###  (Read 28743 times)

0 Members and 1 Guest are viewing this topic.

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« on: April 14, 2015, 09:07:54 PM »
Few pics showing the shaft repair sleeves from SKF (and others) First and third are of the sleeves with flange that allows the thin walled sleeve to be easily driven on with the correct press fit. Last one shows how the flange is designed to allow it to just be peeled off easily. Second shows sleeve with flange removed.

Soooooo,everything went as planned,repairs made,torquing the cv through bolts and guess what. THREE OF THE EFFERS WERE STRIPPED OUT. Likely from the accident a couple years ago. DAMN!!!!! 5 days till dune trip. Figures.  ANOTHER next day air charge IF I can get G-1 to answer their freaking phone. Freaking unbelievable.

 Gear -One continues to be on my CRAP list. There is absolutely no reason for these repairs being needed .The repairs needed should be part of the design from the beginning considering the use of these things.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #1 on: April 14, 2015, 09:08:46 PM »
4 seals,4 repair sleeves = $700.00
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

millbilly

  • Guest
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #2 on: April 15, 2015, 12:53:53 AM »
I will never order anything from them again....  8 months to get a simple part...

Offline Carlriddle

  • Another build? What are you thinking?
  • Hero Member
  • ****
  • Posts: 4593
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #3 on: April 15, 2015, 05:06:35 AM »
4 seals,4 repair sleeves = $700.00
Damn; did they buy your diner, give you a cig and use lube!!  bs1 bs1

Just doing maintenance on cv's?
You can keep your CHANGE, I'd like to keep my DOLLAR.

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #4 on: April 15, 2015, 05:44:27 AM »
Yup. $700 bux. The large repair sleeves are $134 each alone!!!!! The 4 sleeves and 2 of the seals are SKF ,off the shelf items. The large seals are G-1 available only. Custom size things. I was amazed though that the 2 large seals from G-1 were the least expensive items!!! $35 bux each.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline dsrace

  • VIP
  • *
  • Posts: 8564
  • my one true weakness
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #5 on: April 15, 2015, 02:13:23 PM »
gear one has been like this as long as i can remember. my first taste of a one of there products was the reverse box unit they were building for sand bullet!!    expensive pos that never held oil and never stayed in forward gear from day one and with a return trip to be rebuilt still brand new!!
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #6 on: April 15, 2015, 02:37:47 PM »
Well,guess what. They have upgraded (seems like a common BS theme in the offroad components world)the aluminum parts that should have made from steel all along. Only a $750 upgrade! Oh ,the killer part,THEY HAVE NONE !!!!! Soooo,it's helicoils for now. bs1 bs1 bs1 bs1 bs1 bs1  The lady was very nice though. eyes eyes
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline Carlriddle

  • Another build? What are you thinking?
  • Hero Member
  • ****
  • Posts: 4593
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #7 on: April 15, 2015, 02:50:44 PM »
Well,guess what. They have upgraded (seems like a common BS theme in the offroad components world)the aluminum parts that should have made from steel all along. Only a $750 upgrade! Oh ,the killer part,THEY HAVE NONE !!!!! Soooo,it's helicoils for now. bs1 bs1 bs1 bs1 bs1 bs1  The lady was very nice though. eyes eyes

Atleast you got that.  Usually when a problem comes up, they dont have parts, and they're dicks cause you broke it.  rofl
You can keep your CHANGE, I'd like to keep my DOLLAR.

Offline dsrace

  • VIP
  • *
  • Posts: 8564
  • my one true weakness
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #8 on: April 15, 2015, 03:13:26 PM »
i just have to ask......so what size and hp rail are these rated for by gear1????      and a 2000 lb rail with a 280 hp motor did what to them again??????
 ff:
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline dsrace

  • VIP
  • *
  • Posts: 8564
  • my one true weakness
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #9 on: April 15, 2015, 03:15:05 PM »
i know there could be a few that disagree with me about that having anything to do with stripped holes etc etc but  still  ;D
does kartek (  or another competiter) offer a set like these or are these based on there design? if so what do they make there's out of?
« Last Edit: April 15, 2015, 03:25:51 PM by Dsrace »
Don't never argue with an Idiot!
Because he will drag you down to his level and beat you with experience

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #10 on: April 15, 2015, 06:46:14 PM »
It appears that all brands of midboard hubs used aluminum originally. All apparently found out that was a bad idea. GEEEE,YA THINK !!!!???!!!?????? SFAIK know,all either have changed to steel for all components but for the hub itself or offer it as an option today. Just my luck. Hopefully the helicoils and steel repair sleeves will hold up  and I will skip the $750 for upgrading to steel components. I feel pretty confident it will work. The helicoils can be a full .750 long instead of just 3/8ths or 1/2 inch long as most are. The cv bolts will engage the full helicoil length. I would use a solid thread insert but ,no room or at least I feel too much material would be lost and strength would be definitely compromised.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline Simon

  • Fabricator
  • **
  • Posts: 142
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #11 on: April 16, 2015, 03:33:44 AM »
Bad luck with the parts mate. Any chance you can tell us the bearing part numbers just out of curiosity?

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #12 on: April 16, 2015, 05:51:28 AM »
I'll try to remember to look later today when I get to reassembly.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

Offline Simon

  • Fabricator
  • **
  • Posts: 142
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #13 on: April 17, 2015, 02:46:39 AM »
Thanks. Just another thought, you could have drilled and tapped a new set of holes between the old ones if you wanted.

Offline fabr

  • Administrator
  • *
  • Posts: 93117
Re: Gear-One 930 Midboard Hubs Repairs *#@***!!%###
« Reply #14 on: April 17, 2015, 05:56:32 AM »
  Crap,I forgot,in the rush , to get the numbers. I still have the other side to do. I'll do that side when I get back from this trip,didn't want to chance further issues with only 3 days to go. 
  Drilling another set of holes wasn't an option I wished to use. Best option was the long length helicoils. Did the repairs on the mill.Came out perfect. I'm not likely going to spend the money to upgrade the components with steel. The sleeves should stop further excessive wear and the heli's will prevent more stripped threads for a lot less $$$$.
"There can be no divided allegiance here.  Any man who says he is an American,
but something else also, isn't an American at all.  We have room for but one
flag, the American flag... We have room for but one language here, and that is
the English language... and we have room for but one sole loyalty and that is a
loyalty to the American people."
Theodore Roosevelt 1907

-----------------------------------------------------------
 " You have all the right in the world to believe any damn thing you'd like, but you don't have the right to demand that I agree with your fantasy"

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal