DTSFab.com (Desert, Trail and Sand)
Automotive Powered Off Road (AKA: Buggys, Jeeps, Trucks, Etc,Etc. ) => Motor and Drivetrain => Topic started by: fabr on August 01, 2011, 08:19:20 PM
-
Maybe ,just maybe,SOMEDAY I'll learn-Stay Away from EMPI!!!! The little drill guide in the second pic is made from a piece of .750 drill stockis just a 3/16" center hole with a 9/16" counter bore to center the drill bit on the bolt flange. After drilling to below the bolt shoulder,remove the guide and use a 23/64" bit to bore out most of the bolt leaving a thin sleeve that when struck with the chisel breaks off easily and cleanly.Empi shit is so soft a regular bit drills them !!!!!
-
Everything EMPI sells is made in china JUNK!!!! drowning drowning drowning
-
EMPI = Every Mut$rf^^kr Piece Imported
-
Ya guys,I know. Hence the need for the "special tools". LOL!!!!