0 Members and 1 Guest are viewing this topic.
I have a brand new carb that I picked up from appletreeauto.com and I'm not looking to fork over the money to pick up another. Is there a kit to swap the generator for an alternator or do I need to retrofit one? Honestly I haven't had much time to work on it lately ( no garage and it's been cold and crappy lately in NY,) but... I've got more problems. Since I replaced the pushrod tubes they have been leaking even more, and I have oil coming out of my pre heater tubes into my exhaust on the passinger side. Is there an easy fix for it or am I going to need to tear everything apart?
It's also very likely that the jug seals are bad.That can be mistaken easily for leaking tubes
There is only one pushrod tubes to use IMO and that is SCAT's triple O-ring pushrod. They have an internal spring between in inter and outer aluminum halves that keeps constant pressure to the block and head seals. These babies don't leak,not even with offroad abuse! I've have running them for 5 years now, with no problems. The best part is you don't have to remove the cylinder heads to install them.
Are you talking about the seals at either end of the pushrod? I replaced them.
Where can I order these?!?!
Any answers for me about the oil coming out of my pre heaters? Honestly that's what is bothering me the most.