0 Members and 1 Guest are viewing this topic.
Okay, It's finished! Apart from sponsor stickers, everything is done and tested.The prototype Cush drive system worked well.Here are some Specs of the finished buggy and some pictures.Frame- Edge Barracuda with upgraded spec's to suit CAMS racing in Australia.Engine- 2008 Gen II GSXR1300RR Hayabusa Motor, 200hp at the wheels.Front suspension- Double A Arm.Rear suspension, Double A arm with Trailing Links.Front Wheels: 30x7x15's on Steel Light-weight rims with Inner Tube.Rear Wheels: 30x9.5x15 on Allumnium rims with Staun Internal Beadlockers.Front shocks- Fox air 10inch travel Tuned to suit Long course Events,Rear Shocks- Fox air 12inch travel Tuned to suit long course events.Driveline- Chain drive with Custom Cush drive system and Electric Reverse.Front Brakes- 2x Wilwood Dynopro Calipers on 280mm Discs,Rear brakes- 2x Wilwood Dynolite Calipers on 280mm Dics (Outboard)Other Specs:Tilton Master cylindersForced Air System for helmetEDGE quick turn steering rackcollapsible steering systemBeffed up rear lower Suspension Airs and Uprights.Power mode selectionGear indicator and shift lightSpeedo and TachoSplit Brake Pedals, Front inline bia'sPlenty more.PicturesCheers! and thanks to everyone who helped with the Build! The buggy performed Smoothly Today, Not an issue at all