DTSFab.com (Desert, Trail and Sand)
UTV's Off Road ( RZR, YXZ, Mini Buggy, Carts,etc.) => UTV Chassis and Suspension => Topic started by: 405dentech on October 05, 2008, 12:29:21 PM
-
I was wondering what tools were neede to adjust the pressure in the Fox air and the Fox emulsion shocks. Also where to get those tools.
-
poly performance has a nitrogen kit. It is kind of spendy but everything you need is there.
http://www.polyperformance.com/shop/Nitrogen-Kit-p-56.html (http://www.polyperformance.com/shop/Nitrogen-Kit-p-56.html)
-
Yeah $425 is definately a little more than i'd like to spend but i really need to be able to adjust my shocks. Thank you. Has any one else found that setup cheaper anywhere?
-
I got one that id part with for 275.00 20 cu ft tank, and you will own the tank, were are you located tho, not sure about filling it....
-
Yukon Oklahoma. Does it have the gauges and everything?
-
I can get it filled right down the street.
-
yes everything....I bought it at purity cylinder gases...I look and see if they are nationwide...
-
Tank is not branded, should be able to fill anywere, It is currently empty as i left the valve on for the last yr or so....I couldnt ship it with n2 in it anyhow...It is a 20 cu ft tank, a smith 0-500 psi regulator and a blister proof 3' hose, it does not have a no loss connector on it, just a standard air chuck...The 275 would be shipped as well...
-
Well i am going to need something to adjust my shocks so just let me know a total including the other parts we've been talking about and we'll go from there. Also this may sound stupid but does your nitrogen kit come with any kind of instructions? I've never used on before.
-
No, but i will explain it to you via pm... ;D I just sent you a pm, Cancel out the shipping and add this and that would give you a total...
-
pic