Fastcorvairs 930 CV/Axle Assembly Info

[Carlriddle]

Clocking them will do absolutely nothing other than make you feel good about doing it.

That's always been my opinion.

This is on the non-plunging? 

[fabr]

There's the controversy. IMO it doesn't matter whether they are plunging or non plunging.If someone can explain to me how clocking the cv's of either kind will make a bit of difference I'll change my opinion. So far that has not happened. Uj's ,on the other hand MUST be properly timed/clocked/phased or whatever other name is given it.

[BDKW1]

This is on the non-plunging?

Either or, doesn't matter. I have mixed non plunging an plunging on the same axle, clock that............

Far more important things to a CV are clearances, good cages and grease. These will actually make a noticeable difference.

[fabr]

+1 

[gap351]

http://www.outfrontmotorsports.com/cv_assembly.htm

 just something i found out there

[fastcorvairs]

http://www.outfrontmotorsports.com/cv_assembly.htm

 just something i found out there

Re post

OK gap, one thing you need to do is start reading at the very first of a thread.  You just posted the same info that started this one.